Specification Sheet

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
Cyclone Harness Series
Made from some or all of the following materials: polyester, nylon, galvanized steel, and aluminum.
Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2012 regulations.
Cyclone Harnesses are suitable for the following applications:
Custom configurations available. Not repairable.
Contact customer service for details.
For all applications: worker weight capacity range
(including all clothing, tools, and equipment) is 130-420 lbs.
Rescue/Confined Space: A Cyclone Harness may be used in Rescue/Confined Space applications. Rescue
systems function to safely recover a worker from a confined location or after exposed to a fall. There are
various configurations of Rescue systems depending on the type of rescue. Structure must withstand loads
applied in the directions permitted by the system of at least 3,000 lbs. No free fall is permitted. Applicable
D-rings: Dorsal, chest, shoulder.
Personal Fall Arrest: A Cyclone Harness may be used in Personal Fall Arrest applications as a component of a
Personal Fall Arrest System (PFAS). Structure must withstand loads applied in the directions permitted by the
system of at least 5,000 lbs. Maximum free fall is 6’, unless used in combination with equipment explicitly
certified for extended free fall. Applicable D-ring: Dorsal.
Restraint: A Cyclone Harness may be used in Restraint applications. Restraint systems prevent workers from
reaching the leading edge of a fall hazard. Always account for fully deployed length of lanyard/SRL. Structure
must withstand loads applied in the directions permitted by the system of at least 1,000 lbs. No free fall is
permitted. Restraint systems may only be used on surfaces with slopes up to 4/12 (vertical/horizontal).
Applicable D-rings: Dorsal, Chest, Side, Shoulder.
Work Positioning: A Cyclone Harness, configured with side D-rings, may be used in Work Positioning
applications. Work Positioning systems allow a worker to be supported while in suspension and work freely
with both hands. Structure must withstand loads applied in the directions permitted by the system of at least
3,000 lbs. Maximum allowable free fall is 2’. Applicable D-rings: Side, Shoulder.
Part # Sizes Description
21064-
21067
Cyclone Construction Harness w/Pass-Through Chest Buckle, Leg Tongue
Buckles, & Waist Tongue Buckle
S, M-L,
XL, 2XL
21033-
21036
21029-
21032
S, M-L,
XL, 2XL
S, M-L,
XL, 2XL
Cyclone Construction Harness w/Chest Quick-Connect Buckle, Leg Quick-
Connect Buckles, & Waist Tongue Buckle
Cyclone Construction Harness w/Chest Quick-Connect Buckle, Leg Tongue
Buckles, & Waist Tongue Buckle
21052-
21055
S, M-L,
XL, 2XL
Cyclone Harness w/Pass-Through Chest Buckle & Leg Tongue Buckles
21045-
21048
S, M-L,
XL, 2XL
Cyclone Harness w/Chest & Leg Quick-Connect Buckles
21041-
21044
S, M-L,
XL, 2XL
Cyclone Harness w/Chest Quick-Connect Buckle & Leg Tongue Buckles
21082-
21083
M-L, XL
Cyclone Tower Harness w/Chest Quick-Connect Buckle, Leg Quick-Connect
Buckles, & Waist Combination Buckle
21060-
21062
21056-
21058
S, M-L, XL
S, M-L, XL
Cyclone Harness. Black/Orange w/Silver Reflective Webbing,
Quick-Connect Chest, & Tongue Buckle Leg Buckles. No waist belt.
Cyclone Harness. Black/Orange w/Silver Reflective Webbing,
Quick-Connect Chest, Tongue Buckle Leg & Waist Belt Buckles, & Side D-rings.
Contact Guardian Fall Protection for individual harness model UPC codes.
Always follow all manufacturer's instructions for proper adornment and use. Some steps of adorning a harness may
require assistance from another person.
Upon completely adorning a harness, Guardian Fall Protection recommends that another person, with knowledge of the
safe and correct use of the harness, inspect to ensure the harness is being worn correctly.