Instructions / Assembly

Components and Specifications
Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 USA phone: [phone] fax: [phone] www.guardianfall.com
4
Part # Sizes Description
21064 / 21065 /
21066 / 21067
Cyclone Construction Harness w/PT Chest, TB Legs, & TB Waist
S / M - L /
XL / XXL
21033 / 21034 /
21035 / 21036
21029 / 21030 /
21031 / 21032
S / M - L /
XL / XXL
S / M - L /
XL / XXL
Cyclone Construction Harness w/QC Chest, QC Legs , & TB Waist
Cyclone Construction Harness w/QC Chest, TB Legs, & TB Waist
21052 / 21053 /
21054 / 21055
S / M - L /
XL / XXL
Cyclone Harness w/PT Chest & TB Legs
21045 / 21046 /
21047 / 21048
S / M - L /
XL / XXL
Cyclone Harness w/QC Chest & QC Legs
21041 / 21042 /
21043 / 21044
S / M - L /
XL / XXL
Cyclone Harness w/QC Chest & TB Legs
21082 / 21083 S - L / XL Cyclone Tower Harness w/QC Chest, QC Legs, Sternal D-ring, Ventral D-ring, & Side D-rings
21060 / 21061 /
21062 / 21063
21056 / 21057 /
21058 / 21059
S / M - L /
XL / XXL
S / M - L /
XL / XXL
Cyclone Harness (Black/Orange w/Silver Reflective Webbing) w/QC Chest & TB Legs
Cyclone Harness (Black/Orange w/Silver Reflective Webbing) w/QC Chest, TB Legs, & Side D-rings
Materials: polyester, nylon, steel, and aluminum.
Installation and Use
All PFAS equipment must be selected and deemed compatible with Cyclone Harness by a Competent
Person. ALWAYS follow all instructions of all equipment used in combination with Cyclone Harness.
NEVER attach connector to any place on harness other than D-ring. Connector gate must be self-closing
and self-locking, and must withstand minimum load of 3,600 lbs. Any excess strap webbing MUST be
stored in harness Webbing Keepers.
To connect Tongue Buckle, pull webbing strap through framed tongue
component, and insert framed tongue through grommet to secure.
Roller and Friction Adjustments allow the user to make adjustments to Edge Harness straps.
Feed webbing through buckle, and slide the buckle down on the strap to tighten, or slide the
buckle up on the strap to loosen.
To connect Pass-Through Buckle, angle male buckle so it is positioned to
pass up and through female buckle. Fully insert male buckle so that it lies
flat on top of female buckle.
Quick Connect Buckles are activated by engaging two release levers simultaneously to
release the male piece from the female receiver. Adjustments are made by feeding
webbing through the male end using a friction style buckle.
Dorsal D-ring, chest strap, shoulder straps, and leg straps
MUST be fitted for each individual user.