Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
7 85125 (Rev. C)
Labels
2-Way Standing Seam Roof Clamp
Inspection:
Inspect this unit prior to each use. Look
for any deformation, cracks, or excessive
rust. If any of these conditions or any
other damage exist, remove the product
from service immediately!
PRIOR TO USE, READ AND UNDERSTAND MANUFACTURER’S
INSTRUCTIONS PROVIDED WITH EQUIPMENT.
Only make compatible
connections. Do not use oversized
snap hooks or carabiners to attach
to this device. Do not install near
electrical equipment. Only use self
locking snap hooks and carabiners.
Improper use of this device can
result in serious injury or death!
6305 S. 231st St., Kent, WA 98032 • 800-466-6385 • www.guardianfall.com
Compliant with OSHA 1910 and
1926 Subpart M, ANSI Z359.1-2007,
and ANSI A10.32-2012 regulations.
Materials: S45C Steel Main Body;
A36 HRS O-ring; Zinc-Plated Finish.
Specifications: 5,000 lb. minimum
breaking strength.
Weight capacity: 130-310 lbs.
90130 (Rev. B)
Made in China
!
WARNING
Part # 10600
Date of Manufacture:
DO NOT REMOVE LABELS
If equipment fails inspection
IMMEDIATELY REMOVE FROM SERVICE
User must inspect prior to EACH use. Competent Person must complete
formal inspection every 6 months. Competent Person to inspect and initial.
INSPECTION GRID
Date of First Use: __________________. Product lifetime is indefinite as
long as equipment passes pre-use and Competent Person inspections.
YR J F M A M J J A S O N D
20____
20____
20____
20____
20____