Third Party Verification Claim

INSPEC Test Report No: 2.16.05.18 Page 5 of 14
Result details
3.2 Personal Energy Absorbing Lanyard Component
The specimen incorporated a Personal Energy Absorber Component which satisfied
this standard. See INSPEC Test Report 2.16.04.05.
3.2.1 Materials
Specimen 2D03301 was assessed.
Webbing was used on the construction of the energy absorbing lanyard.
The materials used in the construction of this energy absorbing lanyard, and their
characteristics, were not assessed. Manufacturer to certify.
NAs
3.2.2 Terminations
Specimen 2D03301 was assessed.
The energy absorbing lanyard was constructed of webbing.
The end terminations satisfied 3.2.2.2, as appropriate (see below). Ltd
3.2.2.2 Webbing terminations
Specimen 2D03301 was assessed.
a) Lock stitches sewn on all stitched eye termination straps was not assessed.
Manufacturer to certify.
b) The material and characteristics of thread used was not assessed. Manufacturer to
certify.
Threads used for sewing the webbing were black colour. This contrasted with the
yellow colour of the webbing.
c) The webbing was protected at load-bearing connector elements.
e) The ends of the webbing were hot cut so as to prevent unravelling.
NAs
NAs
Pass
Pass
Pass
3.2.3 Connectors
Specimen 2D03301 was assessed.
It incorporated two integrally attached connectors.
Testing of the connectors was not requested. NAs