Third Party Verification Claim

INSPEC Test Report No: 2.16.05.18 Page 13 of 14
Estimates of the uncertainty of measurement
Clause Test Uncertainty
3.2 Personal Energy Absorber Component, if fitted See report
3.2.1 Materials -
3.2.2 Terminations -
3.2.3 Connectors See report
Force ± 1.2%
3.2.4 Dynamic performance – ambient dry
Deployment distance ± 1mm
Force ± 1.2%
3.2.5
Dynamic performance – various
conditions
Deployment distance ± 1mm
Static strength – single lanyard *
3.2.6
Static strength – slippage ± 2.1%
3.2.7
Abrasion and Static strength – Wrap-around energy absorbing
lanyards only
*
3.2.8 Static strength – Wrap-around energy absorbing lanyards only *
3.2.9 Static strength – Y-lanyards only *
Force ± 1.2%
3.2.10.1
Dynamic test, Y-lanyards only – Single
connection
Deployment distance ± 1mm
3.2.10.2 Dynamic test, Y-lanyards only – Dual connection Force ± 1.2%
3.2.10.3 Dynamic test, Y-lanyards only – Hip connection *
5.1 / 5.2 Marking -
5.3 / 5.4 Information -
• The acceptance criterion for this test is a straightforward “Pass/Fail”, rather than a numerical
value. Consequently, as there is no value to be reported, uncertainty has not been reported
either.
Values expressed as a percentage (%) are relative.
It should be noted that the above values have not been taken into account when making assessment to
the pass/fail criteria.