Third Party Verification Claim

INSPEC Test Report No: 2.16.05.18 Page 11 of 14
5.3 General Instruction Requirements
The instructions to users have been assessed as detail below, with reference only to the
relevant requirements of the Standard.
INSPEC Technical Services has not assessed these instructions with respect to claims made
by the manufacturer outside of these requirements, and therefore accepts no responsibility for
the legitimacy of any such claims.
5.3.1 Instructions shall be provided to the user, printed in English, and affixed to the
equipment at the time of shipment from the manufacturer.
Pass
5.3.2 Instructions shall contain the following information:
· a statement that the manufacturer’s instructions shall be provided to users; Pass
· manufacturer’s name, address, and telephone number; Pass
· manufacturer’s part number and model designation for the equipment; Pass
· intended use and purpose of the equipment; Pass
· proper method of use and limitation on use of the equipment; Pass
· illustrations showing locations of markings on the equipment; Pass
· reproduction of printed information on all markings; Pass
· inspection procedures required to assure the equipment is in serviceable condition
and operating correctly;
Pass
· anchorage requirements; Pass
· an illustration of how to calculate free fall distances; Pass
· criteria for discarding equipment which falls inspection; Pass
· procedures for cleaning, maintenance, and storage; Pass
· reference to the ANSI/ASSE Z359.13, Personal Energy Absorbers and Energy
Absorbing Lanyards, standard and applicable regulations governing occupational
safety.
Pass
5.3.3 Instructions shall require that only the equipment manufacturer, or persons or
entities authorized in writing by the manufacturer, shall make repairs to equipment.
Pass
5.3.4 Instructions shall require the user to remove equipment from field service if it has
been subjected to the forces of arresting a fall.
Pass