Instructions / Assembly

Installation and Use
Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
4
1. Prior to use, inspect Guardian External Shock Lanyards and all PFAS equipment to be used in combination
with External Shock Lanyards.
2. Make considerations for eliminating or minimizing swing fall hazards.
3. Ensure that all connectors and all other components of the PFAS are compatible with Guardian External
Shock Lanyards, and are selected by a Competent Person. The selected safety harness MUST be of proper size,
and MUST be fitted snugly, but still allow for a full range of movement.
4. Ensure structure to which the anchorage connector is attached is capable of withstanding a MINIMUM load
relative to the application in which the External Shock Lanyard is to be used.
5. Attach lanyard snap hook or carabiner to compatible harness D-ring. ALWAYS locate the shock absorber end
at the applicable harness D-ring. The shock absorber MUST NEVER be located at the anchorage connector. For
lanyards with two, integrally connected legs, only attach the central snap hook or carabiner to the applicable
harness D-ring.
6. Attach remaining snap hook or carabiner end of lanyard to compatible anchorage connector. Rebar Hooks
MUST ONLY be connected to structural rebar. Ensure that all connectors are self-closing and self-locking, and
that there is no risk of roll-out.
7. NEVER work with employed harness D-ring positioned above the anchorage connector, unless permitted by
specific application or combination of equipment. A Competent Person must make a determination regarding
the acceptability of working above an anchorage connector.
8. Only use Guardian Lanyards in the fall protection application(s) for which they are designed. Refer to
product labeling, or contact Guardian Fall Protection if unsure of proper application(s).
01245
01246
01275
01285
01290
01291
6’
6’
Single Leg Coated Cable Lanyard w/Removable Flame Resistant Cover
Double Leg Coated Cable Lanyard w/Removable Flame Resistant Cover
6’ Single Leg Heavy Duty Tie-Back Lanyard w/Snap Hooks
Single Leg Adjustable Lanyard w/Snap Hooks4’ - 6’
6’
6’
Single Leg Tie-Back Lanyard w/Snap Hooks and Adjustable D-Ring
Double Leg Tie-Back Lanyard w/Snap Hooks and Adjustable D-Rings
11730
11740
11750
11760
11830
11840
11855
11865
11900
11901
11902
11903
20091
21214 6’ Double Leg Lanyard w/Aluminum Rebar Hooks & Snap Hook
Single Leg Double Lock Wrap Lanyard
Single Leg Double Lock Wrap Lanyard4’ - 6’
6’
Double Leg Double Lock Wrap Lanyard
Double Leg Double Lock Wrap Lanyard4’ - 6’
6’
Single Leg Triple Lock Wrap Lanyard6’
Double Leg Triple Lock Wrap Lanyard6’
Single Leg Triple Lock Wrap Lanyard4’ - 6’
Double Leg Triple Lock Wrap Lanyard4’ - 6’
Single Leg Tiger Tail Stretch Lanyard w/Snap Hooks
Single Leg Tiger Tail Stretch Lanyard w/Rebar Hooks
Double Leg Tiger Tail Stretch Lanyard w/Snap Hooks
Double Leg Tiger Tail Stretch Lanyard w/Rebar Hooks
4½’ - 6’
4½’ - 6’
4½’ - 6’
4½’ - 6’
4’ - 6’ Double Leg Adjustable Lanyard w/Rebar Hooks
01237 4’ Double Leg Cable Lanyard w/Snap Hook & Pompier Hooks
Part # Size Description