Product Name: External Shock Lanyards Part #: 01205; 01206; 01214; 01215; 01217; 01218; 01220; 01221; 01223; 01230; 01231; 01237; 01240; 01241; 01242; 01243; 01245; 01246; 01275; 01285; 01290; 01291; 11520; 11730; 11740; 11750; 11760; 11830; 11840; 11855; 11865; 11900; 11901; 11902; 11903; 20091; 21210; 21214 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable Safety Standards 1 Worker Classifications 1 Pro
User Information Date of First Use: Serial #: Trainer: User: Applicable Safety Standards When used according to instruction specifications, this product meets or exceeds all applicable OSHA 1926 Subpart M, OSHA 1910, ANSI Z359.13-2009, and ANSI A10.32-2012 standards for fall protection. Applicable standards and regulations depend on the type of work being done, and also might include state-specific regulations.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St., Kent, WA 98032 Guardian Fall Protection Product Specific Applications ! WARNING Use of equipment in unintended applications may result in serious injury or death. Maximum 1 attachment per connection point. Personal Fall Arrest: External Shock Lanyards may be used to support a MAXIMUM 1 personal fall arrest system (PFAS) for use in Fall Arrest applications.
Two connectors to same D-ring. NO. Connector directly to webbing. NO. Incompatible or irregular application, which may increase risk of roll-out. NO. Connector directly to horizontal lifeline. NO. Two or more snap hooks or carabiners connected to each other. NO. Components and Specifications The specific components of Guardian External Shock Lanyards vary depending on design and intended application. All webbing is made of polyester and nylon, and is 1” in width.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St.
When not in use, store equipment where it will not be affected by heat, light, excessive moisture, chemicals, or other degrading elements. Inspection Prior to EACH use, inspect External Shock Lanyard for deficiencies, including, but not limited to, corrosion, deformation, pits, burrs, rough surfaces, sharp edges, cracking, rust, paint buildup, excessive heating, alteration, broken stitching, fraying, bird-caging, and missing or illegible labels.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St., Kent, WA 98032 Guardian Fall Protection Safety Information ! WARNING Failure to understand and comply with safety regulations may result in serious injury or death. Regulations included herein are not all-inclusive, are for reference only, and are not intended to replace a Competent Person’s judgment or knowledge of federal or state standards. Do not alter equipment. Do not misuse equipment.
www.guardianfall.com 90000 (Rev. I)-1 90000 (Rev. I)-2 90000 (Rev. I)-3 6305 S. 231st St., Kent, WA 98032 DO NOT REMOVE LABELS Remove this lanyard from service if a fall has been incurred. Serial Number : Date of Manufacture: Model Number: Size: _____________ Product lifetime is indefinite, as long as product passes all inspection requirements. Material: Polyester or Nylon Improper use of this product could result in serious injury or death.
