Instructions / Assembly

SPECIFICATIONS:
Materials:
304 Stainless Steel
Materials:
Zinc chromate finished steel
Materials:
Steel (unfinished)
TEMPER ANCHOR
SNAPPY
ANCHOR
Materials:
Galvanized Steel
REUSABLE ANCHOR
Guardian Fall Protection
800-466-6385
WARNING!!
Failure to read and follow
instructions included at time
of shipment can result in
serious personal injury!
Installer must use 10 #12 x 2”
fasteners provided.
Replacement screws must be
ordered for each installation.
All fasteners must attach to
rafter. Use only with
compatible equipment.
5,000lb. anchor. Max. capacity
1 person at 310lbs.
Guardian Fall Protection
TEMPER anchors meet OSHA and ANSI standards. Inspect before each use.
Max. worker weight is 310lbs. 5000 lb. load rating with provided screws.
Use only with compatible connectors and use caution when working
around electrical or chemical sources.
Warning: All holes must be used by attaching into the truss.
Follow instructions included with product in shipment from manufacturer
For Pitches steeper than 4/12, 16d galvanized or duplex nails may be used
instead of screws for fall arrest. Always install fasteners into a truss.
Supplied #12x2" fasteners can be used in fall arrest for any pitch.
With 16d galv./duplex nails on 4/12 pitch or less set up in Fall Restraint ONLY.
REUSABLE
ANCHOR
SP-ANCHOR
Refer to installation instructions be
fore use. Not for permanent application.
This reusable anchor can be insta
lled by:
#14 x 2” screws
(qty. 10) fastened to a truss using the
center row of holes.
16d nails 3.5” (qty. 20) fastened into
side holes into sheathing.
• Anchorage structures
shall be capable of withstanding 5
,000lbs
• Connecting systems should be pro
tected from sharp or abrasive
surfaces. Do not make incompatible connection
s, such as tying rope
directly to attachment point.
• Warning: Avoid physical hazards such
as thermal, electrical, or chemi
cal
elements that could impact the
integrity of the equipment.
DO NOT REMOVE THIS LABEL! (2 of 2)
Warning! Follow the manufactur
er’s instructions included with the
equipment at time of shipment fr
om the manufacturer before usi
ng.
• This anchor point is desig
ned for use as a part of a plann
ed personal fall arrest or fall
restraint system. Make only
safe, compatible connections.
•
Material: Galv. 14ga. Sheet M
etal, Min. Breaking Strength: 5,4
00lbs.
• Maximum user weight (incl
uding tools): 310lbs. One work
er per anchor.
• Warning: REMOVE FROM SERVICE if
subjected to a fall arrest
or if unit fails
inspection. Visually inspect
before each use for crac
ks, excessive wear,
deterioration, or structural inc
apacities
.
USER MUST INSPECT BEF
ORE EACH USE.
Competent Person to Inspec
t and Initial at
least every 6 months.
Date of First Use_________________
YR. J F M
A M J J A S
O N D
Expiration Date is 5 years after r
ecorded date of first use.
Meets all applicable ANSIZ3
59.1/A10.32 standards
Guardian Fall Protection, Kent,
WA
Model # _____________
Manuf. Date _______
______
DO NOT REMOVE THIS LABEL
! (1 of 2)