Product Brochure

Part # WEIGHTDescription
00455
Temper Roof Anchor
3.5 Lbs
Personal Fall Arrest:
Temper Anchors may be used in Personal Fall Arrest
applications to support:
- MAXIMUM 1 Personal Fall Arrest System (PFAS).
Structure must withstand loads applied in the
directions permitted by the system of at least
5,000 lbs.
- Maximum free fall is 6’.
- Applicable D-rings: Dorsal.
Restraint:
Temper Anchors may be used in Restraint applications.
Restraint systems:
- Prevent workers from reaching the leading edge
of a fall hazard. Always account for fully deployed
length of lanyard/SRL.
- Structure must withstand loads applied in the
directions permitted by the system of at least 1,000 lbs.
- No free fall is permitted.
- May only be used on surfaces with slopes up
to 4/12 (vertical/horizontal).
- Applicable D-rings: Dorsal, Chest, Side, & Shoulder.
Need more information?
P: 1.800.466.6385 | visit our website: guardianfall.com
applications
Specs
STANDARDS:
OSHA 1926 Subpart M & 1910
ANSI Z359.18- 17 & A10.32- 12
Type A Anchorage Connector
MATERIALS:
Zinc-plated Steel
NOTES:
• Minimum service temperature: - 30°F
• Installs on wood, metal, or concrete
• All fasteners must be fully embedded
in substrate. Applicable roof pitches:
flat to sheer
• Anchor must install flush against
substrate. Never install onto bare truss.
WORKER CAPACITY:
130- 420 lbs.
PERFORMANCE:
• Maximum Users: 1
• 5,000 lb. MBS (Minimum Breaking Strength)
specifications
Work Positioning:
Temper Anchors, configured with side or shoulder D-rings,
may be used in Work Positioning applications.
- Work Positioning systems allow a worker to be supported
while in suspension and work freely with both hands.
- Structure must withstand loads applied in the
directions permitted by the system of at least
3,000 lbs.
- Maximum allowable free fall is 2’.
- Applicable D-Rings: Side & Shoulder.