User's Manual
21-3610 rev1.4
xL LCD Keypad Installation Instructions
CSG SecurityCorp / Sécurité CSG Corp Page 2 of 2
GUARDAL
L
5201 Explorer Drive, Mississauga, Ont., Canada. L4W-4H1
sales@ guardall.com +1 905.206.8434 | support@ guardall.com +1 905.206.8436 | Fax: +1 905.629.4970
www.guardall.com | +1 877.249.9993
3 Keypad Versions
• LCD Keypad P/N 111-3610 (white), 111-3620 (gray): standard keypad includes 3 programmable alert button inputs, 4
hardwire alarm input points and 1 output point.
• LCD Keypad with internal RF reader P/N 111-3611 (white), 111-3621(gray): keypad includes 3 programmable alert button
inputs, 4 hardwire alarm input points and 1 output point. Includes a built-in RF G-Prox reader.
• LCD with external Wiegand reader Keypad P/N 111-3612 (white), 111-3622 (gray): keypad includes the capability to
connect an external Weigand reader to it. Keypad includes 3 programmable alert button inputs, 2 hardwire alarm input
points and 1 output point.
NOTE: – Double or triple card touch (badge) to LCD with external reader is the equivalent of hold a card (badge) feature at
the LCD with internal reader to e.g. turn protection on and off.
– GProxII and MIFARE readers have been proven to work acceptably when connected to the LCD with external
reader.
All versions
•
Communicate with the main control unit on the SNAPP module bus.
• Backlit, 2x16 LCD display.
• Colours: white, grey.
For further keypad information, please see the Monitor xL™ or Chubb AFx™ Simplified or Advanced Installation and LCD Keypad User
Guides.
NORTH AMERICA: FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by GUARDALL could void the user's authority to operate this equipment.
Canadian Compliance Statement: This Class B digital apparatus complies with Canadian ICES-003.
EUROPE: This equipment has been tested and found to comply with the CE directive and standards for ITE equipment used in commercial and heavy
industrial applications.