User's Manual

TagExciterInstallationManual 07‐00051‐110

©
2010GuardRFIDProprietaryandConfidential

TosettheLFfieldsize
 Pressanykeytoactivatetheuserinterface
 ObservetheLFLEDislit.
 PresstheINCkeyuntilthedisplayreadsthedesiredfieldsize.
 PressENTtosavetheselectedvalueintoTEmemory

Held SEL
key
SEL key
SEL key
Mode N
SEL key
User interface off
LF Setting
Any Key
SEL key
ID setting
SEL key
RF Setting
SEL key
Mode Root Menu
SEL key
Error Code Display
SEL key
Mode 0 Mode 1
Held
Sel Ke
y
Held Sel
&Ent
TE Reset
UI
Timeout
General Keys:
To activate the user interface – press any key.
To turn the user interface off – press and hold SEL and ENT
keys
Enter/Exit Mode settings - Press & Hold SEL Key.
Changing LF, ID, and RF Settings:
INC key – Increments setting.
ENT key – Saves setting.
Changing Mode Setting:
INC – Toggles setting (Decimal Point of 7-Seg display on/off)
ENT key – Saves setting.
Test Mode:
Test – Toggles test mode on/off. Test LED indicates when test
mode is active.