User Instructions

12
3-5. Dry after Sanitizing.
Allow all parts to air dry on a clean surface or towel.
NEVER store wet or damp parts. Store clean, dry pump kit in a clean
bag or container until next use. Sanitize parts before each use.
3-6. Tubing Care.
The Tubing does not contact breastmilk.
Tubing should only be washed if dirty or condensation is
present.
If the condensation is from a previous washing process, there is no
need to wash again.
Use warm soapy water and rinse with clean clear water.
Allow water to drain from tubing completely after washing. Shake out
any remaining water droplets and hang to dry. A small amount of
condensation is ok; however, a tube filled with water droplets may
damage the pump motor.