PLEASE DO NOT RETURN THIS PUMP TO THE RETAILER. If you experience any issues with your Dr. Brown’s Pump, please contact our dedicated Customer Service team by: https://www.drbrownsbaby.com/contact/ or 1-800-778-9001 READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT. PLEASE SAVE THESE INSTRUCTIONS.
Table of Contents 1. Important Safeguards 2. Product Description 3. Getting Started 4. Product Assembly 5. Power Adaptor 6. Operating the Pump 7. Storing Breastmilk 8. Preparing and Feeding Breastmilk 9. Technical Data 10. Troubleshooting 11. Important Symbols 12. Warranty Questions? Please visit www.drbrownsbaby.
1.Important Safeguards READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT. PLEASE SAVE THESE INSTRUCTIONS. WARNING: Read this ENTIRE “Instructions For Use” manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property.
• The breast pump should never be left unattended when plugged into a power source. • Never operate an electrical device if it has a damaged cord, plug orbattery pack, if it is not working properly, if it has been dropped or damaged, or dropped into water. If damage is found, immediately discontinue use of power adaptor or battery pack and call Dr. Brown’s Customer Service at 1800-778-9001. • Do not use the breast pump while bathing or showering.
1.Important Safeguards (cont.) WARNING: To avoid health risk and reduce the risk of injury: •• Repairs must wet be performed only as bymold an authorized service agency. Do not Do not store or damp parts may develop. repair yourself! Do not modify this device or accessories. • Do not run pump with wet tubing. Doing so will harm the pumpmotor. •• Never a damaged device. Replace damaged or worn parts.
2. Product Description Dr. Brown’s™ breast pump includes (2) collection kits: Membrane Breast Flange Membrane Co ver Tubi ng X2 Connector Valve Dr. Brown’s Feeding Parts (x 2) X2 Bottle Includes (2) complete 4oz (120 ml) Dr. Brown’s® Options +™ bottles: Included Accessories: X4 “Narrow” Storage Narrow Neck TravelCap Cap X2 X2 Questions? Please visit www.drbrownsbaby.
Your Dr.
3.Getting Started 3-1. Disassemble The Breast flange/Milk Collection Kit comes pre-assembled. All milk contact components must be disassembled, washed and sanitized. ¼ TURN PULL PULL UNTHREAD Questions? Please visit www.drbrownsbaby.
3-2. Wash Separate and wash all milk contact components by hand in warm water with mild detergent and rinse with clear water or place in the top rack of dishwasher. Only use drinking quality water for cleaning! Milk Contact Components X2 Non-Milk Contact (Wash If Required) X2 See section 3-6 for special tubing care instructions. Dr. Brown’s Feeding Parts: Wash, Sanitize and save for bottle feeding.
3. Getting Started continued Do not submerge the pump motor in water! Wipe clean with a damp cloth only. 3-3. Dry If not for immediate use or sanitizing: Allow all parts to air dry on a clean surface or towel. NEVER store wet or damp parts. Store clean, dry pump kit in a clean bag or container until next use. Sanitize parts before each use. 3-4. Sanitize Before Use. Separate all parts to be sanitized. Method #1: Boil parts in a clean pot of water for 10 minutes. Method #2: Use one of these Dr.
3-5. Dry after Sanitizing. Allow all parts to air dry on a clean surface or towel. NEVER store wet or damp parts. Store clean, dry pump kit in a clean bag or container until next use. Sanitize parts before each use. 3-6. Tubing Care. The Tubing does not contact breastmilk. Tubing should only be washed if dirty or condensation is present. If the condensation is from a previous washing process, there is no need to wash again. Use warm soapy water and rinse with clean clear water.
4. Product Assembly 4-1. Collection Kit Assembly PUSH ¼ TURN PUSH DROP IN THREAD INSTALL VALVE HERE Questions? Please visit www.drbrownsbaby.
4-2. Tubing Connection Male End Connects to Collector Female End Connects to Pump If pumping in single mode, use port plug to block the unused port.
5. Power Adaptor 5-1. Power Connection The power adapter supplied with this unit is polarized (one prong is larger than the other). Always connect to a polarized outlet. 6 VDC 115 V TO 6 VDC POWER ADAPTOR 5-2. Power Adapter Care To prevent damage to your power adapter cord, always grasp the body of the adapter as shown below. Never pull by the cord to unplug. Questions? Please visit www.drbrownsbaby.
6. Operating the Pump 6-1. Pumping Modes Two Modes are available: 1) Letdown Mode- Used to stimulates the release of milk from the breast. This mode helps prompt the reflex that happens when nerves in your breasts are stimulated (usually by your baby's sucking). 2) Expression Mode- Used after the breast is stimulated to release milk. 6-2.
6. Operating the Pump 6-2. Using Letdown Mode (continued) 1) Select the [Power Button] to turn the unit on. The pump will automatically display Letdown Mode at the last used vacuum level used (this pump has a memory feature that recalls the last used settings for both modes). 2) Adjust the vacuum level to your preferred comfort level using the Vacuum Level [Up] or [Down]. There are five settingsfrom which to choose, L1 thru L5. 3) Press the [Power Button] again to start pumping.
6-3. Using Expression Mode (continued) 4. Select the [Mode Selector Button]. When in Expression mode, the Letdown mode symbol will disappear. The pump will automatically start in the last used cycle and vacuum levels (this pump has a memory feature that recalls the last used settings for both modes). 5. Adjust the vacuum level to your preferred comfort level usingthe Vacuum Level [Up] or [Down]. There are twelve settings from which to choose, L1 thru L12. 6.
6. Operating the Pump 6-5. Placement of the Collection Assembly Center the breast Flange on your breast sothat the nipple is aligned with the tunnel portion. Make sure your breast completely fills the Flange to ensure a seal and that a vacuum can form. While you may feel some discomfort when first breast pumping, it should not cause pain. Adjust the Cycle and Vacuum levels to lower settings to achieve your comfort level and milk flow. If you continue to have problems, please contact us at: www.
6-6. Storing a Collection Assembly Often when double pumping, one side is finished before the other. The completed side may be removed from the breast and placed in the convenient half-moon bottle holders or large storage space in the back of the pump housing. The expandable netting will secure the bottle and assembly without risk of spillage. You will need to adjust the vacuum level after removing one collection unit from a breast to maintain performance and comfort level of the remaining unit.
7. Storing Breast Milk 7-1. Milk Storage Containers You may store expressed milk directly in the bottle after pumping. Simply unthread from the Collector assembly and attach a clean sterilized storage cap (included). We recommend you store milk in our disposable Dr. Brown’s™ Breastmilk Storage Bags (sold separately) for easy identification and space savings. Questions? Please visit www.drbrownsbaby.
7-2. Milk Storage Guidelines Guidelines Are for Home Use and Not for Hospital Use. Use the following guidelines for the storage of breastmilk. By following recommended storage and preparation techniques, nursing mothers and caretakers of breastfed infants and children can maintain the safety and quality of expressed breast milk for the health of the baby. These are general guidelines for storing breast milk at different temperatures.
8. Preparing & Feeding 8-1. Fresh Breast Milk If the milk is freshly expressed or thawed to feeding temperature, simply feed in a clean sanitized bottle. Discard any remaining milk after 2 hours. 8-2. Refrigerated Breast Milk Warm the milk to desired feeding temperature in a clean sanitized bottle. Place the sealed bottle in a bowl of warm water for 20 min to body temperature. CAUTION: Do Not Warm Breast Milk In The Microwave Or Boiling Water. 8-3.
Need a faster way to safely thaw and warm breast milk? The Dr. Brown’s® MilkSpa™ Breast Milk and Bottle Warmer quickly and gently thaws and warms milk in storage bags or bottles. The patented pulsating water action warms without overheating, which can reduce nutrients. Visit www.drbrownsbaby.com for details.
9. Technical Data 9-1. Power Supply AC Wall Plug Adaptor: 100-240V 50/60 Hz 0.3A Max Output: 6 VDC 2.0A Regulatory Compliance: XXXXXX 9-2. EMF Compatibility Wireless Statement: Wireless communications equipment such as wireless home network devices, mobile phones, cordless telephones and their base stations, walkie-talkies can affect the electric breast pump and should be kept at least a distance 1.0 m away from the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
9. Troubleshooting Issue No Power No Suction Possible Causes Checks Solution Adaptor Check if the power cord is not connected or it is damaged. Confirm if plugged into working wall outlet and in power port in back of the pump. Tubing Check connection to Collector and to Pump port(s) on the front of the unit. Confirm connections. Inspect tubing for holes or cracks. Replace tubing if crack is in the middle of the length.
10. Important Symbols This symbol indicates do not dispose the device together with unsorted municipal waste (in accordance with local regulations). This symbol indicates compliance with international requirements for protection from electric shock. (Type BF applied parts.) This symbol indicates that the power adaptor is a class II device. This symbol indicates that the power adaptor is for indoor use only. This symbol indicates the compliance with USA and Canada safety requirements.
11. Warranty Warranty This breast pump device is warrantied against defective material or workmanship for a period of one year from the date of purchase. Any defective part will be repaired or replaced at no charge if it has not been tampered with and appliance has been used according to these printed instructions. This warranty gives you specific legal rights as well as other rights which vary from state to state.
Distributed By: Manufactured By: Guangzhou Yongyi Industrial Co., Ltd. B3 Factory, No. 29 Dongsan Street, Qixin Road, Dongchong, Nansha Distric, GuangZhou, 511453 GuangDong, P.R.C.
