Users Manual

Page.79.
000.0V  660.0V range
000.0mV  660.0mV rang
B. AC Voltage Measuring
a. Connect the black test lead to the "COM" jack and the red test lead to the "V/Ω" jack.
b. select U ~ , enter the AC voltage measurement.
C. The tester default Auto range status, by click "AC auto range"
d. Manual range can be select, press the key "NEAR" to restore Auto range
e．Manual range: 0.000V  6.600V range
00.00V  66.00V range
000.0V  660.0V range
000.0mV  660.0mV range
C. DC Current Measuring (only manual range )
a. Connect the black test lead to the "COM " jack and the red test lead to the "mA" jack for a maximum
of 660mA current. For a maximum of 10A, move the red lead to the 10A jack.
b. Select A, enter the DC current measurement, the screen display"DC current ", can select manual
range.
c．Manual range: 0.000mA  6.6mA range
WARNING!
You can't input the voltage which more than 660V AC, it's possible to show higher voltage, but it's
may destroy the inner circuit.
Pay attention not to get an electric shock when measuring high voltage.
WARNING!
Shut down the power of the tested circuit, and then connect the meter with the circuit for
measurement.