Smart Collaboard User Manual
Welcome to Use VTH Smart Collaboard
1BSU * 4BGFUZ 8BSOJOH 1. Place Do not place heavy objects on Collaboard Do not insert any objects into Collaboard; Do not place Collaboard next to equipment with strong radiation; Do not place Collaboard in a damp or dripping place; Do not place Collaboard in a place that is unstable, easy to tilt or fall; Do not place Collaboard near direct sunlight or other strong light sources. 2.
. Humidity Do not expose Collaboard to rain, humidity or places close to water; Please keep the room dry and cool, and the normal working humidity of Collaboard is 10%~90%RH. 6. Ventilation Please place Collaboard in a ventilated place to ensure good heat dissipation; Ensure that the space above the left and right and the rear 10 cm, and the top 20 cm of the whole machine is ventilated. 7.
1BSU ** 0VUXBSE
Code Feature Description Remote control signal receiving interface Front HDMI interface USB interface, for insert mobile hard disk, U disk, USB mouse and keyboard, etc. Front TOUCH interface Power button, Press to enter energy saving mode.
1BSU *** '"2 (1) Why does fog often appear on screen? In order to ensure safety of screen, this product adds a layer of tempered glass to outside of screen, and in order to ensure heat dissipation, there must be a certain gap between two, which is used to reserve air channels for air convection. main cause of fog is that there is a temperature difference between screen temperature and outside temperature, and hot air condenses on glass surface with a lower temperature to produce water fog.
(5) Is it normal to feel that screen body is overheated after using it for a period of time? Does it matter? It is normal for screen to heat up, just like a TV at home, it will generally not have any adverse effects. At present, heat dissipation design of our whole machine is in leading position in industry, is industry standard setter, and complies with international health standards. (6) Will long-term use cause damage to eyes? human eye's recognition of flicker is 50Hz.
1BSU *7 5SPVCMF 4IPPUJOH A. Automatic shutdown 1>Whether sleep function is turned on, refer to ordinary computer inspection items for troubleshooting; 2>Check channel where input source is located, no signal will cause automatic shutdown; 3>Check stability of power supply. B. Indicator light does not light up 1>Check whether power supply is normal; 2>Check whether rocker switch of conference panel is turned on. C.
1BSU 7 .BJOUFOBODF Simple maintenance Correct maintenance and maintenance can avoid some simple faults; Regular and careful cleaning can keep the machine in good appearance and running state; please unplug the power plug before cleaning and maintenance to prevent electric shock.
https://vth.ai/support @2021-2022 VTH Inc.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
