User's Manual

Galaxy G6
- 47 -
NtripServer
This configuration is used in Base+GPRS mode that Base station will transfer its correction onto
the server as long as it connects to internet, then Rover can download the base‟s correction from
server for use.
Ntrip Version: This field provides NTRIPv1.0 and NTRIPv2.0 for optional.
Access Point: This field is allowed to user-defined the correction format which base will
transfer to the server, such as HHHH_RTCM30
NtripCaster
This feature is finally realized on Galaxy G6, the receiver is equivalent to a CORS system that it
generates and broadcasts the user-defined correction for rover if G6 connects a static IP address.
Port: This is the specify port for the access.
Access Point: This is mountpoint which can be user-defined.