Parts List

Note: The sprinkler is a vulnerable part, and the length of the blockage is related to the
local water quality (another reason is that there is sugar falling on the sprinkler).
2.After the candy is finished, there will be flying flossy and fluffy fluff
After the sugar is finished, there are still flying silk and floating flocculents. There is
sugar directly on the stove head cover and the stove head, which leads to a small gap for
sugar production, and the sugar does not all float out within the specified time (5-8
degrees), under the same conditions of time, the temperature rises and the sugar is
released faster. If it still cannot be solved by increasing the temperature (the burner
cover has been used for 10-15 days), the burner cover needs to be replaced/cleaned.
After the stove head cover is removed, use a steel brush to clean the gap around the
stove head (red dotted line) as much as possible. Release the stove head cover and soak
it in water for half an hour before brushing it with a brush (note that the outermost gap
also needs to be brushed clean. )