User's Guide

Friendship Lamps-iHug User Guide Guangzhou Meow-Pet Technology Co.,Ltd
2
2.User guide
1.Power on. Then the light will be blue, indicating that it’s initializing. When the
initialization is over, the light will become red.
2.Please make sure your phone is connected to 2.4G WiFi, then open the supporting
app, click the “Lamp Set Up” button, and enter the WiFi password in the password
box.
3.Put the mobile phone close to the lamp and click OK to start networking. The light
will become purple, indicating that it’s trying to connect to the WiFi.
4.After the lamp successfully connected to the network , it will change to be white
and automatically confirm whether the version needs to be upgraded or not. If it needs
to be upgraded, it will automatically download the newest program and restart it.
After the restart, it will automatically connect to the network.
5.After successfully connected to the server, the lamp will flash green for three times,
then go out.
6.If you touch the lamp for less than 2 seconds, the lamp will brighten to default color,
flash for about 1 minute, keep lighting for 6 hours and then go out.If being touched
for 3 seconds, the lamp will go out. If touching-time is less than 43 seconds and more
than 3 seconds, the lamp will switch its color to 20 different colors one by one, and
each color will keep 1 seconds; if you stop touching when some color is brightening,
the lamp will flash this color for 3 times and then go out, and this color will become
default color. If you touch the lamp for more than 43 seconds, the network,color
setting and other information will all be removed and require to be reset, and the lamp
will go back to step 1.
7.Iinsert a toothpick or other hard objects alike to press the reset button at the
bottom.The network,color setting and other information will all be removed and
require to be reset, and the lamp will go back to step 1.