User's Manual

User Manual
3
Multi Channel Association:
To set association groups by “COMMAND_CLASS_MULTI_CHANNEL_ ASSOCIATION”. Refer to
“Z-Wave Command Class Specification” for detail information, or consult the information
provided by controller/gateway manufacturer.
The device supports 3 association groups(AG):
1
st
AG: reports device’s state. It supports only one Node ID (with/without End Point). A
controller/gateway SHOULD be associated to this AG.
2
nd
AG: to control the associated devices synchronously. When S1’s state changes, it will
send “Basic Set Command” to these devices. It supports upto 5 Node IDs.
3
rd
AG: to control the associated devices synchronously. When S2’s state changes, it will send
“Basic Set Command” to these devices. It supports upto 5 Node IDs.
Note: Please refer to table “Parameters Setting” for the detail configurations for AG 2&3.
Scene Function:
As a Scene device, it supports “Scene Activation CC” and “Scene Actuator Conf CC” ,which
make the device can be added into any scene , and supports 255 Scene ID.
Meanwhile, It can work as a scene controller to activate Scenes. By configuring the
parameters of S2, 3 different scenarios can be realized. The “Scene Activation CC” can be sent to
AG1 (gateway) by “one click”, ”double click” or “hold” external button S2. Pls refer to the
following table items 11,12&13 for more details in configuration.
Parameters Setting:
Add
Function
Byte
Options
Default
Remark
1
Switch state saved
or not when power
failure
1
0x00 not saved，switch will be off
when powered again
0x01 saved，switch will keep the same
state when powered again
0x01
2
External switch type
1
0x00 Button (Momentary buttons )
0x01 Toggle (2-state switches )
0x00
3
2-state switches
1
0x00 for the toggle switch without
specified on/off position
0x01 for the toggle switch with specified
on/off position
0x01
4
OFF timer
1
0x00 forbid manually operation
0x01 allow manually operation
0x01
5
Timing function
2
0x00 function disabled
0x0001~0xFFFF 1s~65535s
0x00
6
ALL ON/ALL OFF
1
0x00 forbid ALL ON, forbid ALL OFF
0x01 forbid ALL ON, allow ALL OFF
0x02 allow ALL ON, forbid ALL OFF
0xFF allow ALL ON, allow ALL OFF
0xFF
7
RESERVE