User's Manual

Operation:
1. How to connect to Bluetooth receiver devices?
Please make sure to turn on your Bluetooth receiver devices at first.
Then Put 2*AA batteries(Not included) into the battery case or used by DC
power(Not included) ,Put in the tape and press the “PLAY” button. The device
will auto search and pair the Bluetooth receiver. The LED light will begin to fast
flash in Blue. When the device successfully pair the Bluetooth receiver, the LED
light will slowly flash in Blue ( Flash one time every one second ) .
If it does not have any Bluetooth device to connect, after the LED light fast flash
for a while, it will change to slowly flash in Blue ( Flash one time every two
seconds ) .
2. Earphone slot: enjoy music when earphones are in the slot.
3. When playing music, you can use the volume control knob to adjust the volume.
4. Press “DIR” button to auto-reverse the cassette.
5. Press “PLAY” button to play the cassette.
6. Play Mode: Selects what the cassette does when it reaches the end of a side.
When set to the “loop” icon, the cassette will automatically switch direction and
begin playing the opposite side when one side has finished. When set to the
single arrow icon, the cassette will simply stop when a side has finished.
7. Press “F.F” button to Fast Forward the cassette.
8. Press “REW” button to Rewind the cassette.
9. Press the "STOP" button to stop playing the tape and the Bluetooth connection
will also be disconnected.
3 - EN
At the end of its life, the device has to be separated from the other waste.
Consign the device and all its components together to a center of electronical
and electrotechnical waste recycling center, designated by your local
authorities