User's Manual

When you can’t pair a Bluetooth headset/speaker, please check the
following:
1. Pay attention to whether the volume is too low, whether the tape is just in the
silent segment. You can try to adjust the volume knob to the maximum and press
the DIR key to turn the tape.
2. Check whether the battery power is sufficient, otherwise you can try to use a new
battery.
3. Make sure the Bluetooth device has sufficient power, you can try to charge the
Bluetooth receiving device to pair again then.
4. Whether there are multiple Bluetooth receiving devices nearby, move to
somewhere else for pairing, or turn off other Bluetooth devices, leave only the
Bluetooth devices that need to be paired.
5. If the Bluetooth headset used is a split type of left and right ears (e.g. Airpods), or
if the left and right ears can’t be connected at the same time, try to connect a
single headset separately.
6. If the Bluetooth playback device is not successfully connected for the first time, or
you want to change another Bluetooth playback device, please press the stop
button, wait for about 30 seconds (the blue indicator on the back of the product
goes out), then turn on the Bluetooth Receiving device first to set it to the pairing
state, then press the PLAY button of the product and wait for the Bluetooth
automatic pairing success.
1 - EN