User's Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation
- 3 Data Transmission
- 4. Operating System Introduction
- 5 Software Operation
- 6 Troubleshooting and Product Maintenance
- Appendix 1 P9IV Product Specification
8
8
Delete Key
Delete one character before enter other characters
9
Tab Key
Make table
10 Shift Key
When using the physical keyboard as input method, this key
can switch between numbers, lowercase and uppercase letters
11 Fn Key
Fn mark will prompt in the upper notification bar when
pressing this key, meaning the functions marked by orange
icons on keys can be used
12 Power LED
In standby mode
Solid red: power is <15%
Off: power is >15%
In charging
Flashing green: in charging
Solid green: full of charge
13
Power button
Turn on/off device
14
WiFi/Bluetooth
LED
Blue: handheld is connected with receiver B/T;
Green: handheld is connected with receiver WIFI;
Off: handheld isn’t connected through B/T or WIFI.
1.3 Accessory
1.3.1 CTMM-1.5 Cable
User can use the cable CTMM-1.5 and the adapter to charge the P9IV and to
transmit data. The cable type is 1.5m Type-C to Type-C.
1.3.2 DSA-45PDH Adapter
The output volt and current of the adapter is 5V/3A, 9V/3A.
Figure 1-4 CTMM-1.5 Cable Figure 1-5 DSA-45PDH Adapter