User's Manual

8
Chapter 2 Basic operation
This chapter introduces basic operation of P9II handheld.
2.1 Turning on, Standby, Turning off
2.1.1 Turning on
Long press the power button till the handheld vibrates for once. It takes about 33
seconds to turn on the handheld.
2.1.2 Standby
Press the power button for one second when the handheld is on and let go, then
the handheld would enter Standby mode.
Note: If the handheld is already in use and it enters Standby mode during operation
(screen dims), to resume operation, press anywhere on the screen and it would come
back to where you left off.
2.1.3 Turning off
If the handheld needs turning off, press and hold the power button for at least 3
seconds until the screen appears a dialog box as shown in Figure 2-1. Then click “OK”
to turn off the handheld.
Figure 2-1