User Manual

The 1S 2S 3S indicators will be solid red. The 4S does
not illuminate when charging the GHOST Drone battery,
as this is a 3S battery pack.
Battery type: LiPo (Ensure that LiPo is selected)
Charging status: indicates charging;
indicates fully-charged
The capacity of the GHOST Lithium Polymer (LiPo) battery is 5400 mAh, rated at 11.1v.
It uses an XT60 connector. The GHOST battery has a power management function built
in, and it should only be charged using the included GHOST charger.(59.94Wh)
BATTERY
04
ACCESSORIES AND ASSEMBLY
CHARGING THE BATTERY
Front view of the charger
Please note that the battery voltage may rise post-flight. This is normal. Do not fly the
GHOST if the battery shows less than a 30% charge.
Battery charging diagram
Side view of the charger
(Make sure the wires are
connected correctly)
(Plug in the 3S balancing socket)
1A 2A 3A
LiPo
1A 2A 3A: Indicates charging amperage
(Battery charges faster with higher amperage.Please
note the suggested charge rate for the included 3S
5400mAh battery is 10 C.)