User Manual

09
Make sure the camera faces the front of Ghost.
WIRE COLOR
Power Cable:
Black to Black, Red to Red
(Gimbal will be destroyed if
colors are reversed.)
Control Cable:
White to White, Blue to Blue
Install rubber ball dampeners onto the gimbal mount, then tighten the short screw
to hold it together with GHOST.
Completion
Completion
Gimbal GHOST
Mount
Short Screws
Rubber Ball
Dampeners
Pop open the cover under GHOST, then pull out the power lead inside of
GHOST. Connect the lead from the GHOST to the female lead on the gimbal.
1
2
2
Installing the gimbal
3
Connect the gimbal with the gimbal Ghost mount.
4
Connecting the power supply
1 2