User's Manual

Edition：
7
5、Press start / stop button to start the measurement (SART/STOP)
6、The compression process is complete, the product will gradually reduce the pressure cuff,
relax and keep still and not to talk
7、After the measurement is completed, the air arm belt will be automatically discharged, the
measurement results will be displayed on the surface of the corresponding column
The initial use, please charge the battery, because the internal product factory charged amount and
the storage time of products can lead to battery power consumed.
If wear a thick coat, please take it off, in order to better measure
Pay attention to dress more thick coat will cause a weak pulse, the measurement results of error
Any time to terminate the measurement, but just need to press the start /
stop button(START/STOP), quick exhaust valve will quickly decrease with pressure in the arm
Such as the continuous measurement, the interval time should exceed 10 minutes
Such as the continuous measurement, the interval time should exceed 10 minutes
regarding the effect of blood flow interference and resulting harmful injury to the
PATIENT caused by continuous CUFF pressure due to connection tubing kinking;
too frequent measurements can cause injury to the PATIENT due to blood flow
interference;
don’t place CUFF over a wound, as this can cause further injury;
don’t place CUFF and its pressurization on any limb where
intravascular access or therapy, or an arterio-venous (A-V) shunt, is present because
NOTICE
（Correct diagraph posture）