User's Manual

installationGuide
Cautions
Troubleshooting
OperationStep
04
06
GradesandConsumption
05
07
08
09
签字受控：
Note: The data shown above is only for reference, and it is normal for
▲Increase the grade ▼Decrease the grade
Problems
Solutions
Do not diffuse
-To check whether the machine switch is turned on.
- The air pump may be damaged,please replace a new one.
-The air tube on atomizer head may be loose, please tighten it
Weak mist
-The atomized core may be blocked,please clean with
-To check whether the gasket is damaged or loose, please
-To check whether the tube is loose or not, please tighten it.
Oil sprinkle
-To check the machine is tilted or laid down, please
Oil leakage
-The bottle cap may be loose, please secure the cap.
-The gasket of the atomizer head is damaged or missed.
Abnormal noise
Before ask for after-sale service, please try to handle the following
!
To avoid the fire or electric shock, please do
To avoid electric shock, short circuit, fire or other
-When the power cable is damaged or isn’t
-Do not wet the machine or the plug;
-Shall not use the overloaded power socket, or
To avoid electric shock, please do not touch
To avoid any problems, please do not disassembly
1、1. Position the bracket holes, then drill holes on the wall, the insert the wall
2、Securethebracketwithscrewsonthewall,andalignwiththeholesofthe
bracket
1.1.Openthemachinewithkey,
2..。Pullouttheatomizerhead
3.Takeoutthebottle,andfillwith
.4.Placethebottlebackintothe
5.Adjusttheworkingperiods,thelockthemachinewithkey.
1.Pleasealwayskeepthemachineupright,tiltingorplacingit
2.Shallnotmodify,disassembleorrepairthemachine
3.Themachinewillnotworkwhenitisnotintheworking
4.Whenthescreenisinlockstatus,thebuttoncannotbe
5.Ifthedisplayisgarbled,breakdownorotherproblems,please
Restore factory setting
(Step: Tap the ENT button and hold about 5 seconds until
Grades
Consumption(g/h)Working time(s)
Stop time(s)
G1
G2
G3
G4
G5
G6
G7
G8
G9
3S
7S
11S
15S
19S
23S
27S
31S
35S
60S
60S
60S
60S
60S
60S
60S
60S
60S
Working3~60s,stop60s
Customized
anddon’tremovethekey
essentialoil,thentightlyclosethehead.
.machine,afteraligningwiththe
.position,pressdownwardthe
.atomizerhead.
.Drillholesinthewall,andinsertthewallanchorsintothehole,then
.securethebracketwithscrews.
anchors into the wall holes.。
Secure the bracket with screws on the wall, and align with the holes of the machine on the
bottom, then secure the machine with screws from the bottom.
machineonthebottom,thensecurethemachinewithscrewsfromthebottom.
installationStep
flatwillcauseoilleakage,whichwillleadtomachinedamage.
arbitrarily.Anyfailurehappens,pleasecontactourrelevant
techniciansintime.
periods,eventheatomizationiconisdisplayedonthescreen.
operatedandthereisnodisplayonthescreen.
restartthemachine.
the “beep” sound coming out.)
the consumption to fluctuate by 15%.
Warning
not damage, force to bend,yank or heavy load,
use AC power plug.
the wire and the machine thundering or/and .
the machine when machine is working.
-The air pump may be loose, please tighten it.
The air pump may be damaged, please replace -
with a new one.
keep the machine upright.
replace a new one.
alcohol or replace a new one.
problems based on the solutions.
展开尺⼨：210*297mm
材质：铜版纸150克
⼯艺：双⾯印刷，过哑膜
cut or reprocess the power cable.
damages.
match with the electrical outlet, please do not
the broken plug.
lightening.
0.067g/h
0.171g/h
0.257g/h
0.386g/h
0.449g/h
0.532g/h
0.606g/h
0.706g/h
0.716g/h
第2页 共2页