Users Manual

Power mode Battery mode Reset button
Level detector
reset button
Battery（1.5V）
USB 5V
Bluetooth
indicator
3、When the machine is first used or hasn't been used for more than 7 days, the
controlling board is out of power. Please insert the batteries/plug in and wait for 1-2
minutes, the machine will be back on automaticlly.
3M tape
Warning: Please use 3M tape AND the nails to fix the mounting bracket.
USB cable
(purchase on selection)
-Check whether the mode you choose is correct or not.
-Check if the machine is during "Non-Working period"
-Air pump may be damaged, change a new one.
-Check whether the tube is loose or not
-The atomizing core is blocked, clean by alcohol or change a
new component.
-Check whether the gasket is damange/loose or not.
-Check whether the tube is loose or not
-Check whether the bottle is loose or not
-The gasket in the atomized head is damaged or loose.
-The atomized head is damaged, change a new one
-The machine is tilled or lie down, keep the machine vertical.
Oil sprinkle
-The air pump is loose, retighten the pump
-The air pump is damaged, change a new one.
Does not diffuse
Low diffuse
Oil spill
Abnormal noise
Breakdown Solution
USB port
Hanging
hole
Key
Bluetooth indicator
Diffuser head
Bottle
AE105C
OPE N
CLO SE
Choose "Power mode" or "Battery mode", plug in or insert the battery.(Please wait about 2
minutes to let machine charged on the first time connect with power.)
OPEN
CLOSE
148*60*160mm
381g
3