Troubleshooting Guide

!
Warning
Specification
Concentration and consumption
Operating instructions
Atomized head
Grade button
Reset button
Oil bottle
Plug
Grade
Mode：
-24hrs mode: keep working around the clock
-Smart mode: only work when it is day time or the
light is enough.
G1
G2G3G4
Smart24hrs
Equipment cleaning
Notes: 1. The working time above of each grade is 15s.
2. Different grade and oil may be with different consumption.
Reset：
-Short press to restore the original password“8888”
-Long press, until hearing a sound for restore factory settings.
Indicator
When it is on, it means the machine
is during the working period.
G1 G2 G3 G4
60s
85s
135s285s
Grade
Pausing time(s)
0.30
0.23
0.150.07
Consumption(ml/hr)
Button control version: easy to handle and light sensor mode
APP version: Controlled by APP, more convenient and intelligent
Product
Size
Volume
Weight
Coverage
Power
: AE103
: 122*65*214mm
: 100ml
: 300g
: 100m
: AC100V-240V 60/60HZ
1. Please keep the machine vertical. Tilt or lie flatly
may cause the oil overflow. The efficiency of the
machine may be affected.
2.The machine must also remain upright when
changing essential oils. Tilt or turn the machine
will cause oil leakage, causing damage to the
machine.
3. Shall not modify, disassemble or repair the
machine. If any failure happens to the machine,
please contact our technical personnel.
The machine need to be cleaned when below situation happens:
1.You're about to change another kind of essential oils
2.The atomization volume goes weak
Cleaning steps:
1.Unscrew the lower cover and take out the oil bottle
2.Find a larger container and fill the industrial alcohol up. Then soak the bottle for 5-10 minutes.
3.Airing the bottle.
2