Specifications

Installation
: A301C-V1.0
: 148*148*473mm
: 1000ml
: 3.1kg
: 400m / 1200m
: 5W
: DC12V
2
Specification
Manual
Adaptor
Oil bottle
1.Unlock the machine
2.Take out the Atomized head with bottle.
3.Unscrew the oil bottle.
!
Warning
The machine needs to be cleaned when below situation happen:
1. You're about to change to another kind of essential oil.
2. The atomized head volume becomes weak.
1. Pull out the atomized head, loose the bottle.
2. Fill moderate alcohol into the bottle and install, then turn on the machine and work
for 5 minutes.
3. Airing the atomized head and the bottle.
Cleaning steps
Equipment cleaning
4.Adding the oil.
5.Install the bottle with atomized head, and lock the machine.
Application：Hotel, conference hall, lobby, bar, SPA, etc.
Key
Lockhole
Atomized head
Oil bottle
DC connector
3
Bluetooth module
-Check whether the mode you choose is correct or not.
-Check if the machine is during "Non-Working period"
-Air pump may be damaged, change a new one.
-Check whether the tube is loose or not
-The atomizing core is blocked, clean by alcohol or change a
new component.
-Check whether the gasket is damange/loose or not.
-Check whether the tube is loose or not
-Check whether the bottle is loose or not
-The gasket in the atomized head is damaged or loose.
-The atomized head is damaged, change a new one
-The machine is tilled or lie down, keep the machine vertical.
Oil sprinkle
-The air pump is loose, retighten the pump
-The air pump is damaged, change a new one.
Does not diffuse
Low diffuse
Oil spill
Abnormal noise
Breakdown Solution
1.Please keep the machine vertical. Tilt or lie flatly may cause oil over flow. The
machine efficiency may be affected.
2.Shall not modify, disassemble or repair the machine if you are not a technician. If
any failure happens to the machine, please contact our technical personnel.