User's Manual

User manual
Guangzhou Andea Electronics Technology Co., Ltd. 6/15
http://www.gzandea.com
4.2.2. Buzzer Default Parameters
Figure 9 Configuration interface for buzzer default parameters
⚫ Type: Unchanged, On, Off, Flash.
⚫ Frequency: value range from 0 to 255, only applicable for the "Flash" type.
⚫ Active time: the frequency of buzzer, only applicable for the "Flash" type.
Note: The device V00.02 and above (including V00.02 version) supports this function
(buzzer is required).
4.2.3. RF Parameters
Figure 10 Configuration interface for RF parameters
⚫ Basic options
1)Auto close RF when RF is free for specified time：in the host control mode, the