User's Manual

User manual
Guangzhou Andea Electronics Technology Co., Ltd. 6/15
http://www.gzandea.com
5.1.2. Buzzer Default Parameters
Figure 7 Configuration interface for buzzer default parameters
⚫ Type: Unchanged, On, Off, Flash.
⚫ Frequency: value range from 0 to 255, only applicable for the Flash type.
⚫ Active time: the frequency of buzzer, only applicable for the Flash type.
5.1.3. RF Parameters
Figure 8 Configuration interface for RF parameters
⚫ Basic options
1)Auto close RF when RF is free for specified time：In the host control mode, the
device will automatically close the RF if it does not receive a command of card
reading or opening the RF.