User's Manual

User manual
Guangzhou Andea Electronics Technology Co., Ltd. 18/39
http://www.gzandea.com
6.1. Configuration Description Of Parameters
6.1.1. System Basic
Figure 25 Configuration interface for system basic
⚫ Work mode: the system work mode can be set to "Host mode" and "Auto read
mode", which will take effect immediately after setting:
A. Host mode: in this mode, after the device starts,it is in a passive state. It
responds to and returns results by receiving commands from the host.
B. Auto read mode: in this mode, it will actively take inventory of the electronic
tags in the sensing area according to the actively read configuration
parameters.
⚫ Data handle for auto read mode: currently only the default option, which is "
No save, output to serial port immediately"。
6.1.2. Communication Interface