User's Manual

User manual
Guangzhou Andea Electronics Technology Co., Ltd. 21/34
http://www.gzandea.com
6.1.6. Antenna Port Parameters
Figure 25 Configuration interface for antenna port parameters
⚫ Enable DC: when checked, the reader antenna interface is output with electricity.
⚫ Default antenna port select: When the reader has multiple antenna interfaces,
the antenna is enabled according to the actual connection. Check to enable.
6.1.7. Auto Read Mode
Figure 26 Configuration interface for auto read mode
⚫ Basic:
Close RF power after inventory: if this parameter is checked, RF will be turned
off automatically after an inventory process is completed.
⚫ Data source: