User's Manual

User manual
Guangzhou Andea Electronics Technology Co., Ltd. 20/34
http://www.gzandea.com
6.1.5. Read/Write Command Parameters
Figure 24 Configuration interface for Read/Write command parameters
⚫ Failed retry N times:
For example, the read data block command is likely to fail in a disturbed
environment, the anti-jamming capability can be enhanced by trying multiple times.
⚫ Unknown tag type: （ The following configuration requires professional
knowledge）
① Block size: the number of bytes per block, NXP ICODE SLI series chips are 4
bytes per block;
② Read block command: for unrecognized tags, we do not know whether it
supports reading single block and reading multiple blocks, if both are
supported, then choose to " Read multiple blocks";
③ Write block：
Command：for unrecognized tags, we don't know whether it supports writing
single block and writing multiple blocks, if both are supported, then choose to
"Write multiple blocks";