User's Manual

User manual
Guangzhou Andea Electronics Technology Co., Ltd. 18/34
http://www.gzandea.com
6.1.4. Inventory General Parameters
Figure 23 Configuration interface for inventory general parameters
⚫ Basic:
① Beep when tag found: if this option is checked, the buzzer will sound when a
tag is detected.
② Default AFI:
AFI Enable: if this option is checked, the AFI value of the comparison tag
required during the inventory process can be filled in the following AFI
parameters;
AFI Value: this parameter is valid only if the" AFI Enable" option is checked;
③ Slot type:
1 Slot：suitable for inventory within 8 tags;
16 Slot：when the number of tags is more than 8, it is more appropriate to use
16 slots than 1 slot;
④ Stop trigger: the trigger condition for the inventory stop.
Exit condition: when the inventory command is executed on an antenna, set
the conditions for inventory stop;