User's Manual

User manual
Guangzhou Andea Electronics Technology Co., Ltd. 17/34
http://www.gzandea.com
Static IP: set IP, Mask and Gateway.
6.1.3. RF And Air Protocol
Figure 22 Configuration interface for RF and air protocol
⚫ RF parameter:
Transmitter power: 250mW ~ 1500mW, the default setting is 1500mW.
When RF closed, Keep antenna port open: check to take effect.
Enable EMC: check to enable EMC mode.
⚫ Air protocol:
CMD ASK: set whether the communication frame of ISO15693 protocol adopts
100% or 10% modulation;
EOF ASK: when using 16 slot counts, whether the EOF of the switching time slot
is 100% or 10% modulation.