User's Manual

User manual
Guangzhou Andea Electronics Technology Co., Ltd. 11/34
http://www.gzandea.com
DC 12V
Power
Antenna
AC 220V
USB data cable
Figure 13 Schematic diagram of using USB communication connection
DC 12V
Power
Antenna
AC 220V
Network cable
Figure 14 Schematic diagram of using Ethernet port connection
6. Device Configuration And Test Instructions
Refer to Chapter 5 "Device Connection" to connect the device and power on the
reader. Through the indicator light to ensure that the reader is working properly, and
then you can configure the reader parameters through the configuration software.
Open the R-Tool folder and find the file in the folder directory,
double-click this file to open the test tool, as shown below: