User's Manual

User manual
Guangzhou Andea Electronics Technology Co., Ltd. 8/34
http://www.gzandea.com
3. Indicator Light Description
Work light
Tag detection
indicator light
Error indicator light
Ethernet connection
indicator light
Ethernet communication
indicator light
Antenna port RF indicator light
Antenna interface electricity output indicator light
Figure 10 Reader indicator light
Table 5 Description of reader indicator light
Type
Mark/
Position
Name
Functional Description
Device
Indicator
Light
V1
Work light
After the device is powered on and the
performance is normal, the light
flashes blue. Otherwise, the light is
off.
V2
Tag detection
indicator light
When the tag is detected, the light
flashes orange, and if the tag is not
detected, the light is off.
V3
Error
indicator light
When an error occurs while the reader
is working, this light is red and
alternate display by steady light and
blinking.
Ethernet
indicator
light
Left of
RJ45
port
Ethernet
connection
indicator light
After the network connection is
successful, the light turns green.
Otherwise, the light is off.
Right of
RJ45
port
Ethernet
communicatio
n indicator
light
When there is data communication,
this light flashes yellow. Otherwise,
the light is off.
Antenna
indicator
light
PWR
Antenna
interface
electricity
output
indicator light
Blue light is always on: the antenna
interface is set to output with
electricity.
Blue light flashing: The antenna
interface setting does not match the
actual antenna properties, you need to
check whether the antenna is