User's Manual

User Manual
Andea Electronics http://www.gzandea.com Page 40 Total 44 Pages
Solution:
① Check whether the error indicator of the control center is red. If it is
red, check the "System Error Flag" under the control command
function to see what kind of failure occurs and set to “Resume
Anti-theft”, see section 5.4 Control Command;
Figure 38 Check System Error Flag in Control Command
② Under the “Search Gate” function, click [Current Status] to see if the
gate is offline, see section 5.2 Search Gate; at the same time, perform
device detection on the gate in problem, see section 5.6.5 Equipment
Diagnosis.
①
②
Figure 39 Check if the gate is offline