User's Manual

User Manual
Andea Electronics http://www.gzandea.com Page 39 Total 44 Pages
②
③
④
①
Figure 36 Acousto-optic Alarm for Single Gate
 Check the tag detection indicator in the status indicator:
(1) The tag detection indicator "On" indicates that the system reads a tag
that meets the alarm conditions, but there is no alarm output. Check
whether the sound and light alarm setting is set to "Do not trigger sound
and light alarm" or to turn off the buzzer. Section 5.3.2 Anti-theft Alarm
Parameters, otherwise some circuit failures (component failure or damage)
should be considered.
②
①
Figure 37 Check Alarm Parameters
(2) The tag detection indicator does not light, you need to check whether
the gate is offline or the system is set to the anti-theft detection hanging.