User's Manual

User Manual
Andea Electronics http://www.gzandea.com Page 28 Total 44 Pages
When an alarm event such as an illegal tag is
detected, or an alarm event broadcast by another gate
is received, or an alarm command issued by the host
is received, the linkage triggers.
Left-side infrared trigger linkage: trigger the linkage
output when the left infrared is blocked.
Right-side infrared trigger linkage: trigger the
linkage output when the right infrared is blocked.
Disactive
Level
Level when inactive
Frequency
Number of pulses consisting of active and inactive
states, used to repeatedly activate the output
Active Time
(100ms)
Active state time
Inactive
Time
(100ms)
Inactive state time
MOS
Output
Trigger
Mode
Refer to Relay Output
Disactive
Level
Refer to Relay Output
Frequency
Refer to Relay Output
Active Time
(100ms)
Refer to Relay Output
Inactive
Time
(100ms)
Refer to Relay Output
5.6.3 Temperature Measurement
Excessive temperature during the operation of the equipment will affect the
operation of the equipment. When the performance of the equipment is unstable,
you can check the temperature of the equipment to see if it is caused by excessive
temperature. Note: Only M gate has temperature detection function!