User's Manual

User Manual
Andea Electronics http://www.gzandea.com Page 20 Total 44 Pages
5.3.4 Other Parameters
Figure 14 Setting Interface for Other Parameters
Table 6 Description for Other Parameters Setting
Setting Options
Description
Infrared
Analytical
Direction
There are two infrared sensors on the gate. The direction
of the entrance and exit of the aisle is set by the
shielding sequence of the two infrared sensors. Take
"1-> 2 in, 2-> 1 out" as an example, that is, the first
infrared sensor is blocked. Then, when the No. 2 sensor
is blocked, it is determined that the flow direction is the
IN direction. On the other hand, the sensor No. 2 is
blocked first and the sensor No. 1 is blocked later.
Default 1-> 2 in, 2-> 1 out.
Buzzer volume
regulation
Set the sound level of the buzzer in the alarm state. The
default is level-4 with the loudest sound.