User's Manual

User Manual
Andea Electronics http://www.gzandea.com Page 9 Total 44 Pages
4 Indicator Description
RFID library gate equipment boxes are equipped with status indicators, there
are 6 indicators at M gate, SC gate / S gate only has work indicator and error
indicator, as shown below:
Infrared
Module
Infrared
Module
V1V2V3V4V5V6
Figure 4 Indicators
Indicator description is as show below:
Table 2 Indicator Description
Indicator
Indicator
Name
Function Description
V1
Work
Indicator
The gate works normally, the light flashes blue.
Abnormally, the light is off.
V2
Error
Indicator
When there is an error in the operation of the
internal program of the gate, the light is red,
otherwise, the light is off
V3
Tag Detection
Indicator
When a tag is detected, the light flashes orange,
otherwise, the light is off.
V4
Infrared
Indicator
If it is steady green, it means that the infrared
module of the previous gate is aligned. If it is off
or flashing, it means that it is not aligned. You
need to adjust the position of the two gates
slightly.
V5
Infrared
Indicator
If it is steady green, it means that the infrared
module of the next gate is aligned. If it is off or
flashing, it means that it is not aligned. You need
to adjust the position of the two gates slightly.
V6
Reserved
/