User's Manual

User Manual
Andea Electronics http://www.gzandea.com 19/44
detected (default setting)
3. Alarm when reading UID and barcode - Read the UID
and barcode data before alarming
Enable broadcast
alarm
Tick for broadcast, all gates alarm when a book is
detected.
Untick, only the specific detecting gate alarms.
Default broadcast.
Alarm output
parameters
Flashing frequency: 3 times by default
Activation time: unit ms, default 100
Invalid time: unit ms, default 100
Closer buzzer
Tick to turn off the buzzer. Default: untick
Data Store
Alarm record stored
position
By default FLASH, the alarm record is saved in flash
and it will not disappear at any time. It can be read at any
time. Optional RAM, the alarm record is saved in RAM.
It will disappear after power failure, and the old record
will be overwritten after overflow. So, it needs to read in
real time.
How many seconds
does the same tag
saved only one record
The same UID alarm filtering interval. The default is 3S.
If the alarm is the same tag within 3S, only one alarm
record is generated.
5.3.3 Tag Detection Performance Parameters
Figure 14 Setting Interface for Parameters of Tag Detection Performance