User's Manual

User Manual
Andea Electronics http://www.gzandea.com 9/44
4 Indicator Description
 Status indicator
RFID library gate equipment boxes are equipped with status indicators, there
are 6 indicators at M gate, SC gate / S gate only has work indicator and error
indicator, as shown below:
Infrared
Module
Infrared
Module
V1
V2
Figure 4 SC gate flow counter and indicator light
Infrared
Module
Infrared
Module
V1V2V3V4V5V6
Figure 5 M gate /S gate indicator light (S gate only has V1 and V2 indicator lights)
Indicator description is as show below:
Table 2 Indicator Description
Indicator
Indicator
Name
Function Description
V1
Work Indicator
The gate works normally, the light flashes blue.
Abnormally, the light is off.
V2
Error
Indicator
When there is an error in the operation of the internal
program of the gate, the light is red, otherwise, the
light is off
V3
Tag Detection
Indicator
When a tag is detected, the light flashes orange,
otherwise, the light is off.
V4
Infrared
Indicator
If it is steady green, it means that the infrared module
of the previous gate is aligned. If it is off or flashing, it
means that it is not aligned. You need to adjust the
position of the two gates slightly.
V5
Infrared
Indicator
If it is steady green, it means that the infrared
module of the next gate is aligned. If it is off or
flashing, it means that it is not aligned. You need to
adjust the position of the two gates slightly.