江苏千里马科技有限公司 物联网车载终端产品说明书 IOT vehicle terminal（TCE101） Product specification Content of this TWO-DIMENSIONAL code： I.
江苏千里马科技有限公司 物联网车载终端产品说明书 network. Users can access the information center server through a computer browser or mobile APP to obtain the location and status of the device. In addition, users can manage and monitor the device through a computer browser or mobile APP. This product has the following functions and features： realizes precise positioning function through GPS positioning system; supports CAN bus data acquisition function;.
江苏千里马科技有限公司 物联网车载终端产品说明书 Average operating <120mA@12V current <60mA@24V Average sleep current of the device Battery capacity Operation parameters 3、 The GPS module is powered off and the GSM module is hibernated Wake up after hibernation A message is reported 8 hours a day for a month <2.6mA@12V <6.
江苏千里马科技有限公司 物联网车载终端产品说明书 The sensitivity 4、 recapture sensitivity: -160dbm tracking sensitivity: -162dbm cold start sensitivity: -148dbm thermal starting sensitivity: -156dbm Communication parameters name parameter Communication mode SMS Communication mode Working frequency band: LTE-FDD: B1/B3/B5/B8 LTE-TDD: B34/B38/B39/B40/B41 note 输出功率： Class 3 (23 dBm ±2 dB) for data traffic LTE-FDD bands Class 3 (23 dBm ±2 dB) for LTE-TDD bands Class E2 (27 dBm ±3 dB) for 5、 Shape mechanism para
江苏千里马科技有限公司 物联网车载终端产品说明书 Figure 1 4
江苏千里马科技有限公司 物联网车载终端产品说明书 FIG. 2 Installation dimension diagram 6. Indicator definition parameter red The machine is in working condition, t-box indicator state stat e instructions flas Indicates that the T-box is working and the internal battery is in charging hing state Norm ally on Indicates that the t-box is working and the internal battery is fully charged Put Indicates the power supply is abnormal.
江苏千里马科技有限公司 物联网车载终端产品说明书 on flas hing Put out Indicates that the mobile communication base station is connected successfully Norm ally on flas hing Indicates that the platform server is being connected Indicates that the communication system is abnormal Indicates that the platform server is successfully connected Indicates that the communication is normal but the connection to the platform Light is gree Put server times out (the connection to the platform is interrupted within 10 D n out minutes) or
江苏千里马科技有限公司 物联网车载终端产品说明书 the platform server times out (the connection to the platform is interrupted within 10 minutes) or the communication system is abnormal Figure 3 Schematic diagram of indicator position 6、 D Connector parameter definition table： Connector pin definition Line no. define color Wire Line no.
江苏千里马科技有限公司 物联网车载终端产品说明书 diameter diameter 1 dynamo D+ blue 0. 3mm2 9 -- -- -- 2 CAN2H Yellow and white 0. 3mm2 10 RS232- TXD purple 0. 3mm2 3 CAN2L Red and white 0. 3mm2 11 RS232-RXD orange 0. 3mm2 4 ACC green 0. 3mm2 12 -- -- -- 5 CANlL brown 0. 3mm2 13 Loading bucket number signal yellow 0. 3mm2 6 power supply－ black 0. 3mm2 14 The standby pink 0. 3mm2 7 power supply＋ red 0. 3mm2 15 Brake frequency signal Green and yellow 0.
江苏千里马科技有限公司 Power protection 物联网车载终端产品说明书 Power supply reverse connection protection, power supply throw load protection The product weight <260g Product protection grade IP65 三、Troubleshooting for common faults: 1. No power supply: Symptom: Indicators A, B, C, and D are off Screening method： 1） Check the state of external battery and key： The indicators A, B, C and D are not on, which may indicate that the GPS device is in hibernation state.
江苏千里马科技有限公司 物联网车载终端产品说明书 vehicle connected to the GPS. If the measured voltage is 0, it indicates that the cable harness connection is broken or disconnected. It is necessary to check that the vehicle is the GPS power supply line.
江苏千里马科技有限公司 物联网车载终端产品说明书 the terminal. If no, go to the next step； 3） Check the location of the vehicle to put LTE network： Check mobile signal strength or LTE signal status through mobile phone. 4） Replace a new GPS device and re-test it. 2、 The device is not positioned： The device is not located fault symptom: The monitoring platform shows that the GPS device is not located accurately, and indicator B is not flashing every one second.
江苏千里马科技有限公司 物联网车载终端产品说明书 FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
江苏千里马科技有限公司 物联网车载终端产品说明书 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
