Product Specs

B Appreance Instruction Desription

①According to the requirements of the installation site, in the space position on the gate,

generally a hole of 35mm diameter is opened in the middle or front side.As below image，⊕ is the

suggest place for open a hole.

Note:The position of the hole should be based on the actual application scenario and gate type, 50cm is only a

reference value.

②Unscrew the nut at the bottom of the gate head post, thread the cable out of the nut, and

remove the nut as shown.

Note: Do not connect network cables, power cables, etc. at this time to avoid installation trouble