User's Manual

Guangdong Strumgle Electrical Appliances Co., Ltd.
User Manual for George II
- 6 -
2.2 When the power consumption is less than 5%, the power indicator light flashes red, and the voice tip "low
battery" will indicate that the battery needs to be charged immediately. Please charge with an adapter that has
been certified.
2.3 Charging when the product is on: the decorative light flashes with red light, and the decorative light normally
displays blue light when it is full.
3. Charging and Using Time：
3.1 Charge for more than 4 hours for the first time until the power indicator is always blue
3.2 Normal charging time: 4.5 hrs
3.3 Battery life (from full battery to no power) :
* All functions work in the same time: ≥4.0 hrs
* Just for fragrance: ≥9.0 hrs
* Just for bluetooth playing: ≥8.0 hrs
* Just for decorative lighting: ＞50 hrs
TROUBLESHOOTING：
If your George can't work properly, please check the following before asking for service：
Failures
Cause Analysis
Remedy
Unable to start or abnormal shutdown
No battery
Charging in time
Power off immediately after power on
No or indistinct fragrance
Haven’t put the capsule
Take out the capsule from the package, remove the
protective package of the balm, and place the
balm correctly in the aromatherapy tank of the
product
The protective package of the ointment was not opened
Start low gear work of device
Check the function settings and read the
instructions for this function
The Bluetooth connection is not
successful, or the music cannot be
played normally
The Bluetooth function of the connected device is not turned
on
Turn on Bluetooth function in connected device
Failed to match Geroge within the time limit
Please pair George in Bluetooth device list within 1
minute
The Bluetooth function of Geroge is disconnected or off
Tap "Bluetooth" again to turn on George's
Bluetooth function
Abnormal noise
The volume of Bluetooth music playing is too high, which
resonates with the parts of George itself
Turn down the music volume
Resonance with the table
Place on a solid table or floor
Incorrect placement of capsule
Check that the capsule is properly placed
The decorative light doesn't work
The lighting function is not turned on
Read the manual and operate the lighting function
correctly
Decorative light does not change
automatically
Set to manual mode
Check the settings
Auto color change mode has been cancelled in app
Check whether the APP cancels the
automatic color change mode
Unable to Charge
Incorrect connection between pype-c and charging
port
Check that the charging port is connected
correctly
The charging USB port doesn’t work
Reselect USB charger